Qiujing Lucky Series 8-Channel Micropipette

Compared with conventional single-channel pipettes, the Lucky Series 8-Channel Micropipette significantly increases working efficiency by transferring liquid through eight channels at the same time. It is particularly suitable for applications involving multiple samples, allowing laboratory personnel to complete repetitive pipetting procedures with improved speed while maintaining excellent consistency.

Its balanced design helps minimize operator fatigue during extended laboratory work, making it suitable for routine testing as well as research environments where large numbers of samples are processed every day.

Pipette operation
A. Set the range
The display window of the handle clearly shows the amount of pipet pipetting. The amount of pipetting is set by rotating the operation 
button clockwise or counterclockwise (for adjustable pipettes only).
When setting the range, please note: rotate to the desired range; Numbers are clearly displayed in the display window; The range set is 
within the range of the pipettor. Don't screw the button out of the range,
Otherwise, it will jam the mechanism and damage the pipettor.
B. Pipetting technique
Forward pipetting:
Ensure that the pipette tip is tightly connected to the tip cone. Move the button slowly and evenly for best pipetting, especially when
 transferring viscous liquids.
The pipettor remains vertical during suction. At the same time, it should be ensured that the specimen liquid and solution tank are clean, 
and the temperature of the pipettor, suction tip, and liquid is the same.
1) Press the operation button to the first stop point.
2) Subside the suction head into the liquid level for 2-3 mm, and gently release the operation button (return to the origin). Carefully lift 
the suction tip off the liquid level and dock it on the container wall to remove excess liquid.
3) Press the button to the first stop point, and the liquid will be discharged. Pause for a moment and continue to press the operation 
button to the second stop point (i.e. blow out). This step will empty the suction head and ensure accurate fluid transfer.
4) Release the button and return to the origin.
3. Store
If the pipet is not in use, it is recommended to hang it vertically on the pipet holder