Qiujing Lucky Series Single Channel Micropipette

Key Features
Single-channel design for precise and controlled liquid transfer
Wide volume range from 0.1 μL to 10 mL to accommodate different applications
Ergonomic handle design for comfortable operation during repeated pipetting
Clear volume display for easy volume identification and adjustment
High accuracy and reliable performance for consistent liquid handling
Impact-resistant construction for enhanced durability in laboratory environments
UV and chemical corrosion resistance for long-term use under demanding conditions
Detachable nozzle components for convenient cleaning and maintenance
Autoclavable components support high-temperature and high-pressure sterilization
Independent range calibration helps maintain reliable pipetting accuracy over extended use

Pipette operation
A. Set the range
The display window of the handle clearly shows the amount of pipet pipetting. The amount of pipetting is set by rotating the operation 
button clockwise or counterclockwise (for adjustable pipettes only).
When setting the range, please note: rotate to the desired range; Numbers are clearly displayed in the display window; The range set is 
within the range of the pipettor. Don't screw the button out of the range,
Otherwise it will jam the mechanism and damage the pipettor.
B. Pipetting technique
Forward pipetting:
Ensure that the pipette tip is tightly connected to the tip cone. Move the button slowly and evenly for best pipetting, especially when
 transferring viscous liquids.

The pipettor remains vertical during suction. At the same time, it should be ensured that the specimen liquid and solution tank are clean, 
and the temperature of the pipettor, suction tip, and liquid is the same.
1) Press the operation button to the first stop point.
2) Subside the suction head into the liquid level for 2-3 mm, and gently release the operation button (return to the origin). Carefully lift 
the suction tip off the liquid level and dock it on the container wall to remove excess liquid.
3) Press the button to the first stop point, and the liquid will be discharged. Pause for a moment and continue to press the operation 
button to the second stop point (i.e. blow out). This step will empty the suction head and ensure accurate fluid transfer.
4) Release the button and return to the origin.
3. Store
If the pipette is not in use, it is recommended to hang it vertically on the pipet holder